 |
|
|
Home »
Our Products » Baths
Baths
MASHING BATH
 |
|
(Model No.RS00B0108) |
For laboratory Breweries, Distilleries, Food
Products, Scientific Analysis of malt extract by Hartong , Congress, and
ASBS Methods and Research Lab.
Analysis procedures
Congress- and Hartong-Methods are standardized
methods to the extraction of different analyses key figures.
Congress-Method
Mashing, by passing through a temperature
program. Use of malt-fine grind and -coarse grind.
Hartong - Method
Mashing at constant temperature (20°, 45°,
65° or 80° C).Use of malt-fine grind
CONSTRUCTION
Rectangular constant temperature bath having
inner reservoir made of thick gauge 304 AISI, Stainless steel buffed to
mirror finish. External casing made of thick gauge CRCA sheet duly
powder coated. The bath is provided with stainless steel lid with 4/6/8
ports. 4/6/8 stainless steel beakers supplied.
INSULATION
Thermal insulation provided in between the walls
to prevent loss of temperature.
DRIVE MECHANISM
A battery of 4 / 6/8 agitators are driven by a
heavy duty Permanent Magnet DC geared motor With DC frequency drive. The
stirring paddles are made out of stainless steel rods. The speed of
agitator, which oscillates through drive knob and digitally indicated
with Variable Speed 15-150 rpm (can be customize the RPM as per customer
requirements) . The drive assembly is mounted on a rigid stand just
above the constant temperature bath with detachable stirring paddles.
Stirrer
Heavy Duty PMDC motor stirrer for bath for
uniform temperature of bath, Shaft made of Stainless steel 304 grade
HEATING
Stainless steel sheathed immersion heater made
of Oxidized Nichrome wire fitted at the bottom of the bath to uniformly
dissipate the heat across the bath area
CONTROL PANEL
Comprise of Mains On/Off, Digital Microprocessor
Based PID Temperature Controller, Digital Timer, Motor On/Off,
Electronic Speed Controller And Rpm Indicator.
- Temperature Controller: Fully automatic microprocessor PID temperature controller with PT-100 sensor accurately controls the desired set temperature of the bath with +0.5°C accuracy. The controller is having two display for set and process value.
- Digital Timer: Facilitates to preset the duration of the test run in hour/minutes. The drive system stops automatically after elapse of set time.
- DC Frequency Drive: Continuously variable speed is adjustable by means of a knob by turning it clockwise / anticlockwise.
- RPM Indicator: Digitally indicates the speed of the agitator.
SALIENT FEATURES
- Designed for heavy duty continuous operation.
- An electrically control constant temperature bath.
- A battery of 4/6/8 agitator driven by AC geared motor.
- AC frequency drive help regulate the digitally indicated oscillation speed.
- Wide range of speed and temperature with high accuracy and uniformity.
- Noiseless drive system.
- Microprocessor based control system.
- Compact size having embedded control panel.
TECHNICAL DATA
|
|
|